REACH Regulation MSDS testing verifies that chemical substances, mixtures, and consumer articles entering the European Union market comply with the substance restrictions and safety documentation requirements of Regulation (EC) No 1907/2006. This technical guide covers SVHC Candidate List screening, Annex XVII restricted substance analysis, and the preparation of 16-section Safety Data Sheets (SDS) required by manufacturers, importers, and downstream users for regulatory compliance and supply chain communication.
Technical Overview
REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) is the European Union framework regulation for chemical safety, implemented as Regulation (EC) No 1907/2006 and administered by the European Chemicals Agency (ECHA). It entered into force on 1 June 2007 and applies to all substances manufactured in or imported into the EU in quantities of one tonne or more per year, whether on their own, in mixtures, or contained in articles.
MSDS (Material Safety Data Sheet), formally known today as SDS (Safety Data Sheet), is the core hazard communication document required under Article 31 of REACH. An SDS must follow the 16-section format defined in Annex II of REACH, harmonized with the CLP Regulation (EC) No 1272/2008 and the Globally Harmonized System (GHS) of classification and labelling. The international standard ISO 11014 further defines the structural and content requirements for SDS preparation.
REACH MSDS testing therefore serves two complementary purposes: first, analytical verification that a substance, mixture, or article does not contain Substances of Very High Concern (SVHC) above regulatory thresholds or substances restricted under Annex XVII; and second, generation of reliable physical-chemical, toxicological, and ecotoxicological data needed to complete SDS Sections 2, 3, 9, 10, 11, and 12 accurately.
Key Regulatory Obligations
- Article 31: obligation to supply a compliant SDS for hazardous substances and mixtures supplied to professional users
- Article 33: duty to communicate SVHC information when a Candidate List substance exceeds 0.1% weight-by-weight (w/w) in an article
- Annex II: prescribed content and format of the 16-section Safety Data Sheet
- Annex XIV: Authorisation List of substances requiring explicit authorization for continued use
- Annex XVII: restrictions on the manufacture, placing on the market, and use of dangerous substances
- Candidate List: ECHA-maintained SVHC inventory, updated approximately twice per year, now containing more than 240 entries
Testing Samples
REACH-related testing can be performed on virtually any material or product category placed on the EU market. Sample preparation typically involves homogenization, solvent extraction, or digestion depending on the matrix and target analytes. Common sample categories include:
Chemical Substances and Mixtures
Raw chemicals, solvents, paints, coatings, inks, adhesives, cleaning agents, lubricants, and cosmetic or industrial formulations. Testing focuses on compositional verification, impurity profiling, and measurement of physical-chemical parameters required for SDS sections.
Plastics, Rubber, and Polymeric Materials
Pellets, granules, finished components, and elastomeric parts. These matrices are routinely screened for phthalate plasticizers, short-chain chlorinated paraffins (SCCPs), bisphenols, flame retardants, and PAH-containing extender oils.
Metals and Metal-Coated Articles
Alloys, fasteners, jewelry, and surface-treated components. Testing targets lead, cadmium, nickel release, hexavalent chromium, and restricted organotin coatings.
Textiles, Leather, and Footwear
Fabrics, dyed components, and leather goods. Screening covers azo colorants that may cleave to regulated aromatic amines, chromium VI in leather tanning, dimethylformamide (DMF), and perfluorinated compounds.
Electrical and Electronic Products
Cables, connectors, enclosures, and circuit assemblies. REACH screening is frequently combined with testing under IEC 62321 methodology for phthalates, flame retardants, and restricted plasticizers in polymeric and electronic parts.
Toys, Childcare Articles, and Consumer Goods
Products with heightened exposure risk are subject to stricter scrutiny, particularly for SVHC content, migration of heavy metals, and restricted substances in accessible components.
Testing Items
Testing scope is generally divided into three blocks aligned with REACH obligations and SDS data requirements.
SVHC Candidate List Screening
Full or targeted screening against the current ECHA Candidate List. Because the list is updated approximately every six months, testing programs must reference the applicable list version at the time of assessment. Key analyte groups include:
- Phthalates: DEHP, DBP, BBP, DIBP, DINP, DIDP, DNOP, and related esters
- Heavy metals and their compounds: lead, cadmium, mercury, arsenic, cobalt, and antimony
- Bisphenols: Bisphenol A, Bisphenol S, and related substances
- Flame retardants: HBCDD, TBBPA, decaBDE, and short-chain chlorinated paraffins
- Polycyclic aromatic hydrocarbons (PAHs): benzo[a]pyrene and other restricted congeners
- Per- and polyfluoroalkyl substances (PFAS), including PFOA and PFOS-related compounds
- Siloxanes, anilines, phenolic compounds, and other organic SVHC entries
Annex XVII Restricted Substances
- Azo colorants releasing restricted carcinogenic amines (listed in Appendix 8)
- Nickel release from articles in direct and prolonged skin contact
- Hexavalent chromium (Cr VI) in leather and cement products
- Cadmium and its compounds in plastics, paints, and jewelry
- PAHs in rubber and plastic articles with skin or oral contact
- Organotin compounds: TBT, DBT, DOT, and DPT in consumer products and textiles
- Mercury in measuring devices, lamps, and switches
- Restrictions on lead in consumer articles and jewelry
- Formaldehyde, nonylphenol ethoxylates, and CMR substances in specific applications
Physical-Chemical Parameters for SDS Completion
- Appearance, odor, melting point, boiling point, and flash point
- Flammability, explosivity, oxidizing properties, and self-ignition temperature
- vapor pressure, density, and solubility in water
- pH, viscosity, partition coefficient (n-octanol/water), and evaporation rate
- Stability, reactivity, and decomposition products under defined conditions
Testing Methods
REACH substance testing relies on well-established instrumental analytical techniques, performed by accredited third-party laboratories under ISO/IEC 17025 quality systems. Method selection depends on the target analyte, matrix, and required detection limit, which must typically reach well below the 0.1% w/w SVHC threshold.
- Gas Chromatography-Mass Spectrometry (GC-MS): determination of phthalates, PAHs, azo dye cleavage amines, VOCs, and organotin compounds following solvent extraction
- Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS): quantification of bisphenols, PFAS, siloxanes, and thermally labile SVHC substances
- Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) and ICP-Mass Spectrometry (ICP-MS): elemental analysis of heavy metals after acid digestion
- UV-Visible Spectrophotometry: colorimetric determination of hexavalent chromium and nickel release
- EN 14362 series: standardized methods for detecting banned azo colorants in dyed textiles and leather
- EN ISO 17075: determination of chromium VI content in leather
- EN 1811: reference method for nickel release from articles in prolonged skin contact
- IEC 62321 series: methods for phthalates, flame retardants, and restricted substances in electrical and electronic products
Typical Testing Workflow
A standard compliance project proceeds through sample receipt and homogenization, matrix-appropriate extraction or digestion, instrumental quantification against calibration standards, confirmation by secondary transitions or spectral match, and reporting of results with measurement uncertainty. Test outcomes feed directly into SVHC declarations, SDS drafting or revision, and regulatory decision-making on market placement.
Applications
REACH MSDS testing supports compliance across the entire product lifecycle and supply chain:
- EU market access: demonstrating conformity for products exported to the European Economic Area and supporting customs documentation
- SDS authoring and updating: supplying verified analytical data for each of the 16 SDS sections, including classification under CLP criteria
- Supply chain communication: fulfilling Article 33 obligations to inform customers when SVHC content exceeds 0.1% w/w in articles
- Supplier management: validating material declarations received from upstream vendors and identifying substitution needs
- Product development: screening alternative materials and formulations during design to avoid costly redesigns after launch
- Due diligence and audit defense: maintaining objective evidence of compliance efforts for market surveillance authorities and corporate customers
- ECHA submission support: providing analytical data supporting registration dossiers and chemical safety reports
FAQ
What is the difference between MSDS and SDS?
MSDS (Material Safety Data Sheet) is the historical term, while SDS (Safety Data Sheet) is the current term under GHS and REACH. The two terms are used interchangeably in practice, but the document must now follow the standardized 16-section format of REACH Annex II with classification aligned to the CLP Regulation.
When is an SDS required under REACH?
An SDS must be provided when a substance or mixture is classified as hazardous under CLP, when it contains PBT or vPvB substances, or when it contains a Candidate List SVHC above the concentration limits specified for professional supply. Voluntary SDS provision is also recommended for articles in certain downstream situations.
What does the 0.1% SVHC threshold mean?
The threshold refers to 0.1% weight-by-weight of an SVHC in an article. Exceeding this level triggers the Article 33 duty to provide the customer, on request, with sufficient information to allow safe use, including at minimum the name of the substance. Since 2021, this obligation applies to each article as such, including those contained in complex products.
How often should an SDS be updated?
An SDS must be updated without delay when new hazard information becomes available, when an SVHC is added to the Candidate List and appears in the mixture above threshold, or when the classification changes. ECHA recommends reviewing SDS content at least every two to three years even without new data.
Is laboratory testing legally mandatory for REACH compliance?
REACH does not unconditionally mandate testing for every actor, but manufacturers and importers must ensure their SDS information is accurate and consistent. Analytical testing by accredited third-party laboratories is the recognized approach for verifying SVHC and Annex XVII compliance, particularly when supplier declarations are unavailable or unreliable.
How long is a REACH test report valid?
There is no fixed statutory validity period. Because the Candidate List is updated twice a year and products may change over time, industry practice treats reports as current for approximately one year or until the next Candidate List update, product reformulation, or revision of the relevant test method.
Can one test report cover multiple products?
Only if the products share identical material composition. Distinct materials, colors, formulations, or component suppliers generally require separate testing to ensure that results are representative of each article placed on the market.
Why Choose ZKGX?
- State-of-the-art analytical equipment
- Highly qualified scientific team
- Fast turnaround time
- Competitive pricing